We believe that almost all of the workers who have noble aspirations in this field would hope to become more competitive in the job market (without GB0-371-ENU practice test: Constructing H3C High-Performance Campus Networks) and are willing to seize the opportunity as well as meeting the challenge to take part in the exam in your field since it is quite clear that the one who owns the related certification (GB0-371-ENU exam preparation) will have more chances to get better job than others. Nevertheless, the confusing and difficult questions in the exam serve as the tiger in the road. Now our company is here to provide the panacea for you—our GB0-371-ENU study guide files. Our Constructing H3C High-Performance Campus Networks certification training files have been rewarded as the most useful and effective study materials for the exam for nearly ten years. In order to let you have a better understanding of our company's products, I list some of the advantages of our GB0-371-ENU practice exam files for you.

Preferential price

Even though the sales of our GB0-371-ENU practice test: Constructing H3C High-Performance Campus Networks have maintained the top position for more than 10 consecutive years, we are always trying our best to make our GB0-371-ENU exam preparation files more valid and useful for all of the workers in this field who are preparing for the meaningful exam. In addition, offering discounts in some important festivals for our customers is another shining points of our GB0-371-ENU study guide files. If you want to buy the high quality study material for the exam with the minimum amount of money, just choose our GB0-371-ENU training materials: Constructing H3C High-Performance Campus Networks. Do not hesitate anymore!

Immediate delivery

"The Eternal pursuit, endless struggle." is the tenet of our company. That is why we are continuously in pursuit of improvement in our operation system.(GB0-371-ENU practice test: Constructing H3C High-Performance Campus Networks) During the ten years, we have spent lots of time and energy on improving technology of our operation system in order to ensure the fastest delivery speed, and we have made great achievements now. We can assure you that you can get our GB0-371-ENU exam preparation within 5 to 10 minutes after payment, that is to say you can start to prepare for the exam with the most effective and useful study materials in this field immediately after you pay for our GB0-371-ENU study guide files.

First-class after sale service

Our Company have attached great importance to the quality of our GB0-371-ENU exam preparation files, at the same time, we firmly believe that first-class service is the key for us to win customers in the international market, so our company will provide exquisite technology and strict quality control along with first-class after sale service to our customers. In other words, you really can feel free to contact with our after sale service staffs if you have any questions about our GB0-371-ENU study guide files, we can ensure you that you will get the most patient as well as the most professional service from our staffs. If you feel excited about our advantages of our GB0-371-ENU practice test: Constructing H3C High-Performance Campus Networks you can take action so as to make great progress now.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. Regarding the relationship between SuperVLAN and Sub VLAN, the following description is correct

A) Sub VLAN only contains physical ports, and the internal host uses the address of the Super VLAN interface as the gateway
B) SuperVLAN is equivalent to aggregating Sub VLANs so that all Sub VLANs share the same Layer 3 interface
C) Although physical ports cannot be included in SuperVLAN configuration, after the mapping relationship between Super VLAN and Sub VLAN is established, the physical ports included in SubVLAN belong to Super VLAN
D) SuperVLAN only establishes Layer 3 interfaces, responsible for Layer 3 forwarding of Sub VLAN

2. In the networking shown in the figure, the PIM SM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1 RT3 is connected to the receiver, and IGMP is enabled on the corresponding interface, and the multicast source 2.2.2.2 is connected View the unicast routing table on RT2 on RT3 as follows:
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 11 Routes: 12
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.2.1 so/2/1
2.2.2.2/320SPF 10 1562 192.168.2.1 so/2/1
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
OSPF 10 3124 192.168.0.1 S0/2/0
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, when the receiver (Receiver) sends a group join request, which of the following routers have (*, G) entries

A) RT3
B) RT2
C) RT1

3. In the switching network as shown in the figure, all three switches have only default VLAN1. The interconnection ports of the three switches are Trunks, and all VLANs are allowed to pass. All three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet1/0/1 port is set to Forbidden on the switch SWA. Check the status of each Trunk port on the three switches. (Choose one or more)

A) [SWB]display interface Ethernet 1/0/2 Ethernet1/0/2 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10,20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B) [SWC]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10,20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
C) [SWA]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
D) [SWB]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

4. In the network as shown in the figure, after completing the corresponding configuration on the switch SWA, when the switch SWA receives the data frame from the PCA to access the PCB, it will judge whether to check the MAC address table or the routing table according to it.

A) The source IP address of the data frame
B) Source MAC address of the data frame
C) VLAN attributes of data frames
D) Source MAC address of the data frame
E) Destination MAC address of the data frame

5. The two switches SWA and SWB are connected together by four Ethernet cables. The corresponding interface on the switch SVVA has the following configuration:
[SWA-Ethernet1/0/1]display this
duplex full
speed 10
[SWA-Ethernet1/0/2]display this
duplex full
speed 10
[SWA-Ethernet1/0/3]display this
duplex half
speed 100
[SWA-Ethernet1/0/4]display this
duplex half
speed 100
It can be known from the above information

A) Four Ethernet ports join the same aggregation group through static aggregation, and the selected ports are Ethernet1/0/1 and Ethernet1/0/2
B) Four Ethernet ports join the same aggregation group through static aggregation, and the selected ports are Ethernet1/0/3 and Ethernet1/0/4
C) Four Ethernet ports join the same aggregation group through static aggregation, and the selected ports are Ethernet1/0/1 and Ethernet1/0/3
D) Four Ethernet ports join the same aggregation group through static aggregation, and the selected ports are all four ports

Solutions: