Use Real 300-625 Dumps - Cisco Correct Answers updated on 2022
CCNP Data Center 300-625 Exam Practice Dumps
Becoming adept at Cisco MDS 9000 series switches and gaining updated skills that are crucial for data center management is possible if one secures passing grades in Cisco 300- 625 exam. With its latest and updated content, the obtained understanding would be of the highest grade and will help one to get an edge over others.
NEW QUESTION 39
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID.
What is the reason why the configuration is not working?
- A. Static domain IDs apply only after a switch is rebooted.
- B. Domain manager fast restart is not enabled on the switch.
- C. Build fabric notifications were not sent to the other switches.
- D. The disruptive keyword was not used on the command.
Answer: A
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 40
Drag and Drop Question
Drag and drop the boot issues from the left onto the correct solutions on the right.
Answer:
Explanation:
NEW QUESTION 41
Drag and drop the boot issues from the left onto the correct solutions on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide/b_Cisco_Standalone_Series_NX-OS_Troubleshooting_Guide_chapter_01.html#reference_7F7ADD86A12B4D2389E478280BE037A0
NEW QUESTION 42
A storage administrator manually configure a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID. What is the reason why the configuration is not working?
- A. Static domain IDs apply only after a switch is rebooted.
- B. Domain manager fast restart is not enabled on the switch.
- C. Build fabric notifications were not sent to the other switches.
- D. The disruptive keyword was not used on the command.
Answer: A
NEW QUESTION 43
A storage administrator is connecting two previously configured switches to make a single fabric.
When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch.
Which command should the administrator use to allow these switches to work together?
- A. zoneset copy active-zoneset full-zoneset
- B. zoneset import interface fc1/1 vsan 10
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
Answer: B
NEW QUESTION 44
Which two platforms support the FCoE protocol? (Choose two)
- A. Cisco MDS 9222i Series
- B. Cisco Nexus 7010 Series
- C. Cisco Nexus 2248TP Series
- D. Cisco Nexus 2332TQ Series
- E. Cisco MDS 9148S Series
Answer: B,D
NEW QUESTION 45
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?
- A. show vsan database
- B. show fcdomain
- C. Show fc2 plogi
- D. show flogi database
Answer: B
NEW QUESTION 46
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. Merge control is disabled.
- B. The fabric is locked by admin on switch-2.
- C. Hard zoning is enabled.
- D. The fabric is locked by admin on another switch.
- E. The switch has a conflicting domain ID.
Answer: B
NEW QUESTION 47
Which command identifies the application and the user that have a Cisco Fabric Services session open?
- A. show zoneset active
- B. show cfs application
- C. show device-alias database
- D. show cfs lock
Answer: B
NEW QUESTION 48
Drag and Drop Question
Drag and drop the DCNM configuration tasks from the left onto the correct tools on the right.
Answer:
Explanation:
NEW QUESTION 49
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN
10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?
- A. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 - B. switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn - C. switch(config)# port-security activate vsan 10
- D. switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 - fc1/48
Answer: C
Explanation:
Section: Management and Monitoring
NEW QUESTION 50
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. clear
- C. force
- D. commit
Answer: B
Explanation:
Section: Implementation
NEW QUESTION 51
A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?
- A. show telemetry transport
- B. show telemetry pipeline stats
- C. show analytics system-load
- D. show telemetry control stats
Answer: A
NEW QUESTION 52
DRAG DROP
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Select and Place:
Answer:
Explanation:
Section: Management and Monitoring
NEW QUESTION 53
Refer to the exhibit.
Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. smart-zoning
- B. session
- C. qos
- D. device-alias mode
Answer: D
NEW QUESTION 54
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the adrrarustrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset copy active-zoneset full-zoneset
- B. zoneset import interface fc1/1 vsan 10
- C. zoneset distribute full vsan 10
- D. zoneset overwrite-control vsan 10
Answer: B
NEW QUESTION 55
What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with Fibre Channel interfaces?
- A. frames stuck in the HBA buffer of the server
- B. frames stuck in the storage system
- C. out-of-service Fibre Channel interfaces on the SAN switch
- D. NP Port reload connected to the upstream SAN switch
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 56
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?
- A. The rename command is moved to the rejected list and the add command executes successfully.
- B. Both commands are moved to the rejected list.
- C. Both commands execute successfully.
- D. The device alias is renamed and the add command is moved to the rejected list.
Answer: A
NEW QUESTION 57
Refer to the exhibit. What is the result of the configuration?
- A. No-drop CoS values are advertised by the DCBX.
- B. PFC fails to operate properly unless LFC is disabled on Ethernet 1/10.
- C. LFC is prioritized over PFC on Ethernet 1/10.
- D. PFC operates on Ethernet 1/10 regardless of the capability of the peer.
Answer: A
NEW QUESTION 58
......
Typical Candidate Profile
Think of the Cisco 300-625 exam only if you want to cement your feet in the world of Cisco data center technologies. Alone or in combination with other tests, it allows one to hone competencies related to this field and solidify their knowledge base. Professionals who have already been working in a job role like technical/technological decision-makers or network architects are perfect for this exam.
Get ready to pass the 300-625 Exam right now using our CCNP Data Center Exam Package: https://testinsides.dumps4pdf.com/300-625-valid-braindumps.html